EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Charge Controller is usually a very successful photo voltaic controller suitable for off-grid solar units. Determined by multiphase synchronous rectification technologies, it assures optimized Electricity conversion and method balance for an array of photovoltaic (PV) programs.
Essential Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Photo voltaic Cost Controller technological know-how for exceptional solar Power harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
Several Load Handle Modes like guide and timer.
Extensive Electronic Protections against overcharging, more than-discharging, short circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Make certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product range and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Find a perfectly-ventilated, dry site near to the battery lender.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Keep suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Warning: Often follow correct safety protocols and make sure the procedure is run off ahead of connecting elements.
Phase 1: Join the battery terminals to your cost controller (optimistic to good, destructive to detrimental).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Join the load terminals if using a direct load link.
Stage four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power over the controller by connecting the battery 1st.
Make use of the Liquid crystal display Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time checking utilizing the MT50 distant meter.
Information is usually logged through the RS485 communication port working with application including Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Typical Issues
Situation 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification engineering makes certain:
Greater Effectiveness: Reduced Strength losses during conversion.
Enhanced Trustworthiness: Stable effectiveness below variable masses.
Longer Battery Existence: Dependable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological Click Here innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and procedure longevity.