EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is a hugely economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it guarantees optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) apps.
Critical Functions with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Solar Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Critical features consist of:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for enhanced battery daily life.
LCD Screen with authentic-time data checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the delivered mounting brackets.
Maintain proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Demand Controller
Caution: Often adhere to proper protection protocols and ensure the method is run off in advance of connecting parts.
Stage one: Hook up the battery terminals for the charge controller (favourable to beneficial, adverse to damaging).
Stage two: Hook up the solar panel array for the PV input terminals.
Move three: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Info Logging
The Tracer AN Collection supports actual-time monitoring utilizing the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing software for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Issue 1: No Ability Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change system parameters if important.
Problem 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT configurations inside the menu.
Benefits of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification technological know-how guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Click Here Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Daily life: Regular and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is surely an Fantastic choice for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup guidebook, people can ensure highest effectiveness and procedure longevity.